Boynton Beach Roofing
We’ve been performing roof repairs in this area since 2002. So we are excited to continue the task of Boynton Beach Roofing for all types of roof repair. From metal roofing to shingle and more.
Boynton Beach Roofing Gallery
How To Perform A Roof Repair
Here is a Boynton Beach roofing repair we performed recently.
This was as a situation that is difficult to repair because of all the different angles of the roof. Which makes sense why it would leak if it wasn’t installed properly the first time.
You have the angle of the fascia board and how it ties into the shingle roof along with the falt roof that is connected to it as well.
In these situations, you have to think like a rain drop and figure out where the water can go and make sure you have the proper flashing in place for each angle.
On this job we had to remove everything down to the plywood. Thankfully the wood was still in good condition so we were able to keep the decking.
We had to install custom bent metal to transition around all the angles. Next, we flashed that metal into the underlayment and shingles. We had to use the torch to properly lay down a piece of flat roofing material along the top flat roof.
Thankfully the shingles were still being made so we were able to install the Owens Corning Duration shingle. This type of repair is tricky because the old shingles were dirty so the new ones stand out, even though they are the same color.