The Steps Involved in Re-Roofing With Asphalt Shingles
A durable Asphalt Shingles roof can last for a period of fifteen to twenty years. Ample care should be taken to this kind of roof to ensure that no issue arise which would necessitate repair, however, when this asphalt Shingles roof stays for a long period of time it wears out and the only way of have a new lease to the roof is by re-roofing.
Whichever method of roofing shingles you settle on there are various steps involved in order to re-roof with Asphalt Shingles. First the top covering of the current roof must be cleared using a shovel or garden fork. The roof should also be swept clean to remove debris then after this the new Asphalt Shingles are placed over in a layer up to the top.
The next step in roofing shingles is to slice out 2 inches strip from the gutter plate which goes in to about 12 inches. The strip is supposed to reach just about 2 inches to the bottom of the third layer. In order to satisfactory make a base for the new Asphalt Shingles roofing, its vital to build a layer of new roof felt. This layer helps to make it water repellent; this felt also increases the life span of the new roof.
The first new layer of the roofing shingles should be laid in the opposite direction; this usually helps in getting rid of the water which might seep through. The other remaining Asphalt Shingles are placed all round the perimeter of the house.
Lastly when laying down the Asphalt Shingles they are required to face alternate directions, this pattern is to be continued up to the peak of the roof while placing the roofing shingles. The last row should overlap as it’s supposed to go to the opposite side of the roof. When the entire roof is covered with Asphalt Shingles, the topmost layer is formed starting from the peak all the way to the roof line.
To ensure a successful re-roofing the roof line has to be appropriately capped with each of its segment covered to ensure that water flows to the edge.